Flow Sensors

CS2 Correlation Pipe Sensor

Part No. CS2-V3

Large measurement range for big pipes

Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation in pipes up to 5000 mm diameter

[Translate to English:] Durchflussmessung - Installationsvergleich

[Translate to English:] Durchflussmessung Ultraschall Kreuzkorrelation

NIVUS NFP Produktfilm - Schnelle und einfache Montage

Very high accuracy by means of ultrasonic cross correlation method
Interference-free connection over long distances through digital signal transmission
Cable extensions over several 100 metres with standard cables possible without any problems
Absolutely stable zero point and drift-free
Measurement in slightly to heavily contaminated media
Suitable for media with high solids loads
Easy installation without additional constructions thanks to optimised mounting accessories
Installation under process conditions possible
Particularly suitable for pipe sections starting at 1000 mm diameter

The pipe sensors are designed for mounting from the outside into the pipelines using nozzles. In combination with transmitters such as NivuFlow 750 or NivuFlow 7550 and an additional external level measurement, they form a complete flow measurement system for part filled applications. They can also be used for permanently full pipes or Channels. The additional height measurement can be omitted here.

Typical applications for CS2 pipe sensor

Channel networks: billing measurement places, flow measurement in large pipe sections
Wastewater treatment plants: intake, discharge, activated sludge tank intakes, return sludge, recirculation, surplus sludge, digester discharge and flocculant dosage
Pump stations: pumped quantities
Industrial wastewater networks
and many more

General
Measurement principle	Correlation with digital pattern recognition (Flow Velocity)
Measurement frequency	1 MHz
Protection	IP 68
Ex-Approval	II 2 G Ex ib IIB T4 Gb (ATEX) Ex ib IIB T4 Gb (IECEX)
Operating temperature	−20 °C to +50 °C −20 °C to +40 °C if using the sensors in Ex Zone 1
Storage temperature	−30 °C to +70 °C
Operating pressure	max. 4 bar (for combi sensors with pressure measuring cell max.1 bar)
Cable lengths	For sensors without plugs (sensor connection type "K" and "L") extendable to max. 250 m cable length. For sensors pressure measurement cell (level measurement Type VxD0/VxU1), a pressure compensation element is required for cable lengths over 30 m, which can also be used to connect the extension.
Cable types	LiYC11Y 2 x 1.5 + 1 x 2 x 0.34
Outside cable diameter	8.4 mm ±0.25 mm
Sensor types	Flow velocity sensor with v-measurement by cross-correla-tion and temperature measurement to compensate for the influence of the latter on the speed of sound
Construction	Pipe sensor for installation in pipes with sensor screw joint and retaining element
Medium-contacting materials	Polyurethane, stainless steel 1.4571, PPO GF30, PEEK, PA6
Measurement range	−350 cm/s to +600 cm/s
Max. Measuring span	Δ 700 cm/s
Quantity of scan layers recorded and computed	Max. 32
Zero point drift	absolutely stable zero point
Error limits (per scan layer)	< 1 % of measurement value (v > 1 m/s) < 0,5 % of measurement value +5 mm/s (v < 1 m/s)

Specifications subject to change.

Technical Instructions | Correlation Sensors and external Electronic Box (Rev. 12)

download file
PDF 7 MB

Mounting Instruction | Correlation and Doppler Sensors (Rev. 08)

download file
PDF 4 MB

EC type examination certificate sensor type POA, OCL and CS2

EC type examination certificate sensor type POA incl. supplement

download file
PDF 516 KB

IECEx Certificate of Conformity "Sensors type POA, OCL and CS2"

download file
PDF 761 KB

EU Declaration of Conformity | Ultrasonic Active Sensors POA / OCL / CS2

download file
PDF 37 KB

EU Declaration of Conformity | “Ex” Ultrasonic active sensors POA / OCL / CS2

download file
PDF 193 KB

Tender Specification CS2 Sensor

download file
DOC 46 KB

Haven't found the appropriate product?

You haven’t found the right product? Then use our application configurator – it will get you to the right product step by step.

Go to configurator

Individual Offer / Questionnaire

Also for your individual measurement spot we support you gladly. Please fill in our questionnaire.

Download questionnaire

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.

Service hotline

+49 7262 9191-794

Send message

Service

You have questions about your NIVUS products in use? Our service hotline will readily support you.

Service hotline

+49 7262 9191-955

Send message