Flow Meter

NFP Flow Meter

Part No. NFP

High accurate for full pipes

Cost-efficient alternative to conventional EMFs/mag meters. For continuous flow measurement in slight to heavily polluted media in full pipes <DN 800

  • Cost-efficient alternative to EMFs/mag meters considering the total costs
  • Very high measurement accuracy
  • Quick and easy retrofitting for all pipe materials
  • Uncomplicated and reliable commissioning even under process conditions
  • Flow metr for river water, rainwater, dirty water, sludge, cooling water, domestic and industrial wastewater and more.
  • ATEX approval for Ex-Zone 1
  • Easy assessment of measurement places
  • Easy-to-read display
  • For use with Type POA pipe sensors

 

NFP (NIVUS Full Pipe) flow meter was developed particularly for flow measurement in full pipes from DN 100 to DN 800. The system is based on the cross correlation principle for slight to heavily polluted media. The NFP combines grid measurements featuring adapted weighting of areas with velocity profile correction.
The unit stands out for highest measurement accuracy and a very good price-performance ratio. Appropriate NIVUS accessories facilitate installation and maintenance at low costs. The NFP therefore is ideal also to replace obsolete or defective EMFs and other measurement systems. Existing flow meters do not have to be dismantled.

 

Typical NFP applications

  • Pump stations for rainwater, dirty water and combined water
  • WWTPs
  • Pressurised pipelines
  • Drainage pipelines
  • Return sludge pipelines
  • Recirculation pipelines
  • and many more

 

Common
Power supply100 to 240 V AC, +10 % / -15 %, 47 to 63 Hz or 24 V DC ±15 %, 5 % residual ripple
Power consumption max. 18 VA, typ. 7 VA
Enclosure Material: Polycarbonate Weight: approx. 1620 g Protection: IP 65
Ex-ApprovalII(2)G [Ex ib] IIB
Operating temperature-20 °C to +60 °C Ex: -20 °C to +40 °C
Storage temperature-30 °C to +70 °C
Max. humidity90 %, non-condensing
DisplayBack-lit graphic display, 128 x 64 Pixel
Operation6 keys, menus in German, English and French
Inputs1 digital input 1 active pipe sensor Type POA connectable
Outputs1/3 x 0/4–20 mA, load 500 Ohm, 12 Bit resolution, accuracy 0.1 % (after calibration) 2 relays (SPDT), max. load 230 V AC / 2 A (cos. 0,9

Specifications subject to change.

Brochure NIVUS Full Pipe NFP

Brochures / Data Sheets English

High accurate flow measurement in full pipes

Instruction Manual NFP

Instruction Manuals / Technical Information English

Instruction manual for Measurement System NFP

 

Tender Specification NFP

Texts for Tender Specification English

EU Declaration of Conformity OCM F / OCM FR / NFP

Certificates German English

Durchflussmessumformer stationär
OCM F / OCM FR / NFP

EU Declaration of Conformity "Ex" OCM F / OCM FR / NFP

Certificates German English

"Ex" Durchflussmessumformer stationär
OCM F / OCM FR / NFP

  • POA-Rohrsensor für die Durchflussmessung im Abwasser

    POA Correlation Pipe Sensor

    Cross correlation sensors for flow velocity and level detection in part filled and full pipes and...
    Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes
Flow measurement for pump efficiency

Flow Measurement Pumps

Quick and cost-efficient upgrade of a wastewater pump station with a flow...
Quick and cost-efficient upgrade of a wastewater pump station with a flow measurement.
Flow Measurement Pressure Vessel Pump Station

Pressure Vessel Pump Station

Quick and cost-efficient upgrade of a wastewater pump station with a flow...
Quick and cost-efficient upgrade of a wastewater pump station with a flow measurement
Flow Measurement behind Grit Chamber

Retrofitting Flow Measurement

Retrofitting flow measurements in two previously installed stainless stee pipes...
Retrofitting flow measurements in two previously installed stainless stee pipes DN 600 behind grit chamber.
Recirculation Flow Measurement

Sludge Measurement

Replacement for 2 non-functional measurements in full filled pipe conduction...
Replacement for 2 non-functional measurements in full filled pipe conduction with high air-, pollution and grease load.
Return Sludge Flow Measurement

Return Sludge

Flow Mesaurement and flow volume in telescopic pipes.
Flow Mesaurement and flow volume in telescopic pipes.
Hot Sludge Flow Measurement

Hot Sludge

Continuous measurement of sludge coming from a digestion tower and being pumped...
Continuous measurement of sludge coming from a digestion tower and being pumped through a heat exchanger. Required to detect possible blockage or reduced pump performance and to ensure permanent heat supply for the WWTP social areas.
Flow Measurement at Overflow Sill

Bypass Flow Measurement

Cost-efficient and accurate measurement even at low flow rates in the 200 mm...
Cost-efficient and accurate measurement even at low flow rates in the 200 mm bypass line and eliminiation of EMF due to frequently flooded facility.
Flow and Analysis Measurement

Flow and Analysis Measurement

Installation of a measurement place for billing purposes including flow rate and...
Installation of a measurement place for billing purposes including flow rate and pH measurement as well as sampling point upstream of the junction into the municipal channel.
  • Modulares Montagezubehör für Messumformer zur einfachen Montage

    Transmitter Accessories

    The mounting accessories allow the quick and easy installation of transmitters. The solid...
    The mounting accessories allow the quick and easy installation of transmitters. The solid high-quality accessories made of stainless steel 1.4301 are suitable for indoor and outdoor installation. Transmitters can be simply installed in close vicinity to measurement places. Weatherproof covers protect the transmitters from influences due to weathering in outdoor areas. All accessories are supplied including the according fastening materials.
  • Überspannungsschutz für Messgeräte und Sensoren

    Overvoltage Protection Unit

    DataPro, SonicPro and EnerPro surge arrestors – highly stressable and particularly adjusted to...
    DataPro, SonicPro and EnerPro surge arrestors – highly stressable and particularly adjusted to sensors and transmitters. Maximum operational safety at small dimensions.
  • Overvoltage protection enclosure

    BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge arrestors
    BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge arrestors
  • NivuFlow750 Messumformer für hochgenaue Durchflussmessung

    NivuFlow 750 Flow Meter

    For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes...
    For ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult conditions.
  • NIVUS PCM Pro Ex Messumformer für Durchflussmessung

    PCM Pro Flow Meter

    For portable ultrasonic flow measurement of slight to heavily polluted media in part filled and full...
    For portable ultrasonic flow measurement of slight to heavily polluted media in part filled and full pipes and channels. Best possible results even under difficult conditions

Haven't found the appropriate product?

You haven’t found the right product? Then use our application configurator – it will get you to the right product step by step.

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.

Service

You have questions about your NIVUS products in use? Our service hotline will readily support you.

We will keep you informed.

Find out all you need to know about NIVUS - product news, special promotions, practical examples and much more