Flow Sensors

POA Correlation Wedge Sensor

Part No. POA-V2XXK

Medium measurement range for levels up to ca. 1m

Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom

Description
  • Für Durchflussmessungen mit sehr hoher Genauigkeit durch Ultraschall-Kreuzkorrelationsverfahren
  • Störsichere Verbindung über lange Distanzen durch digitale Signalübertragung
  • Kabelverlängerungen über mehrere 100 Meter mit Standardkabeln problemlos möglich
  • Absolut nullpunktstabil und driftfrei
  • Messung in gering bis stark verschmutzen Medien
  • Einfache Montage ohne zusätzliche Einbauten und optimal abgestimmtes Montagezubehör
  • Montage unter Prozessbedingungen möglich
  • Befestigung mittels Schrauben oder verschiedenen, optional erhältlichen Befestigungssystemen
  • Für alle Kanalquerschnitte geeignet
  • Die abgestimmte Auswahl an Sensorbauformen garantiert optimale Lösungen für alle Applikationen

Die POA Fließgeschwindigkeitssensoren sind zur kontinuierlichen Messung in leicht bis stark verschmutzen Medien geeignet.

Die Keilsensoren sind zur Befestigung an Kanalwandungen, auf dem Kanalboden sowie an Innenwandungen von großen Rohren konzipiert. Sie bilden in Kombination mit Messumformern wie z.B. NivuFlow 750 oder NivuFlow 7550 sowie mit im Sensor integrierten oder externen Füllstandmessungen ein komplettes Durchflussmesssystem.

Typische Anwendungen für den POA Keilsensor

  • Kläranlage: Zulauf, Ablauf, Zulauf zu den Belebungsbecken, Rücklaufschlamm, Rezirkulation, Überschussschlamm, Ablauf vom Faulbehälter und Flockungsmitteldosierung
  • Stationäre Messungen an Regenbehandlungsanlagen wie RÜB, RRB, RKB
  • Direkteinleiterkontrolle, Fremdwasser- bzw. Leckageermittlung
  • Industrielle Abwassernetze
  • u.v.m.
Technical Data
Allgemein
Measurement principle
  • Ultrasonic Cross Correlation with digital pattern detection (flow velocity)
  • Ultrasonic transit time (level measurement)
  • Piezo-resistive pressure measurement (level measurement)
Protection

IP 68

Operating pressure

max. 4 bar (combi sensor with pressure cell max. 1 bar)

Cable lengths

10 / 15 / 20 / 30 / 50 / 100 m pre-configured, can be extended upon request;

a pressure compensation element is required if cables longer than 30 m are used with sensors featuring an integrated pressure measurement cell. The compensation element can be used also to connect the extension.

Sensor connection
  • Cable end pre-configured for connection to NivuFlow 750
  • Cable end with plug for connection to NivuFlow Mobile 750
  • Cable end with plug and pressure compensation element (sensors with pressure measurement cell only) for connection to NivuFlow Mobile 750
Medium-contacting materials

Polyurethane, stainless steel 1.4571, PPO GF30, PA

Optional: sensor resistant to chemicals made of PEEK, mounting plate made of Hastelloy C-276; mounting plate made of titanium; cable with FEP coating

Ex-Approval
  • II 2 G Ex ib T4 Gb (ATEX)
  • Ex ib IIB T4 gb (IECEX)
Cable types
  • Combi sensor with pressure measurement: LiYC11Y 2x1.5 + 1 x 2 x 0.34 + PA 1.5/2.5
  • Sensors without pressure measurement: LiYC11Y 2x1.5 + 1 x 2 x 0.34
Operating temperature
  • −20 °C to +50 °C
  • −20 °C to +40 °C if using the sensors in Ex Zone 1
Storage temperature

−30 °C to +70 °C

Outside cable diameter
  • Combi sensor with pressure measurement: 9.75 mm ±0.25 mm
  • Sensors without pressure measurement: 8.4 mm ±0.25 mm
Sensor types
  • v-sensor with T-compensation
  • v-sensor with T-compensation and h measurement (water-ultrasound)
  • v-sensor with T-compensation and h measurement (hydrostatic)
  • v-sensor with T-compensation and 2 x h measurement (water-ultrasound + hydrostatic)

Flow velocity measurement

Measurement range

-100 cm/s to +600 cm/s

Quantity of scan layers recorded and computed

max. 32

Measurement uncertainty
  • for 0.05≤|V|≤0.5 m/s: E_v=0.5/|V| [%]
  • for |V|>0,5 m/s: E_v=1 %
Zero point drift

absolutely stable zero point

Beam angle

±5 degrees

Level measurement water-ultrasonic sensor

Measurement range

0.05 to 200 cm

Zero point drift

max. 0.75 % of final value (0 – 50 °C)

Measurement uncertainty

standing medium: +/- 0.5 of final value (within a range of 0.05 – 5 m)

Temperature measurement

Measurement range

−20 °C to +60 °C

Measurement uncertainty

±0.5 K

Measurement uncertainty

+/− 2.0 mm or 0.2% of measured range (whichever is greater)

Level measurement – Pressure

Measurement range

0 to 500 cm

Zero point drift

absolutely stable zero point

Specifications subject to change.

Downloads

Technical Instructions | Correlation Sensors (Rev. 09)

Technical instructions for correlation sensors and external electronic box

Installation Instruction | Correlation and Doppler Sensors (Rev. 07)

Installation instruction for save installation 

EC type examination certificate sensor type POA, OCL and CS2

EC type examination certificate sensor type POA incl. supplement

IECEx Certificate of Conformity "Sensors type POA, OCL and CS2"

Declaration of Conformity Ultrasonic Active Sensors POA / OCL / CS2

Ultraschall-Aktivsensoren POA / OCL / CS2

EU Declaration of Conformity | “Ex” Ultrasonic active sensors POA / OCL / CS2

System Products
Applications
Accessories
Related Products

Haven't found the appropriate product?

You haven’t found the right product? Then use our application configurator – it will get you to the right product step by step.

Also for your individual measurement spot we support you gladly. Please fill in our questionnaire.

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.

Service

You have questions about your NIVUS products in use? Our service hotline will readily support you.

Hello
We are glad to have you here! For any question regarding water or digitisation we are happy to answer you call or your email message.
Team NIVUS
Im Täle 2
75031 Eppingen