Level Sensors

UniBar E II

Part No. HSB0 UE

Screw-in probe stainless steel measurement cell piezo-resistive

Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. With piezo-resistive stainless steel measurement cell.

  • Robust and reliable screw-in probe with ½“ threaded connection
  • Piezo-resistive measurement cell
  • for gases as well as clean to slightly polluted liquids
  • 2-wire probe
  • Ex Zone 0
  • High overpressure resistance
  • Integrated overvoltage protection

The hydrostatic level probe with G ½“ thread has been developed to meet the high demands of industry and environmental protection.

The corrosion-proof encapsulation featuring IP68 protection rating allows to use the unit for reliable level detection in containers and tanks
The probes are particularly suitable for pressure investigation in closed systems and pipelines.
Due to the use of piezo-resistive measurement cells made of stainless steel (1.4404) the UniBar E II has proven very well for use under extremem conditions in aggressive media such as acids and caustic solutions..

Electric connection is made by using screw clamps in a stainless steel enclosure or plugs according to DIN ISO 4400. There are four standard measurement ranges available. The probes can be also calibrated on customer request.

Utilising the widely used 2-wire technology, the installation costs are very low.

The unit is optionally available with a 4-character LCD integrated into the enclosure lid for indication of measurement values.

Typical applications for UniBar E II

  • Pump stations
  • Pipelines
  • Containers and tanks
  • Digester outlets
  • Industrial applications
  • and many more
Technical Data
Power supply 12 to 36 V DC
Ex: 12 to 28 V DC
Enclosure Stainless steel 1.4305
cable gland brass nickel-plated
Process connection G ½” DIN ISO 3852
open connection with 12 mm hole
diaphragm made of stainless steel 1.4435
process connection made of stainless steel 1.4571

Protection IP 68 (process connection)
IP 67 (on-site enclosure)
IP 45 (plug)
Measurement principle capacitive
Measurement range 1 m mH2O / 2 Bar
2 m mH2O / 2 Bar
4 m mH2O / 4 Bar
6 m mH2O / 4 Bar
10 m mH2O / 7 Bar
20 m mH2O / 10 Bar
1 Bar / 7 Bar
2 Bar / 10 Bar
4 Bar / 25 Bar
6 Bar / 25 Bar
10 Bar / 40 Bar
20 Bar / 80 Bar
40 Bar /120 Bar
special measurement ranges upon request
Accuracy according to IEC 60770 0,25 % / 0,35 % FSO
Long-term stability ± 0,1 % FSO / year
Ex-Approval II 1G Ex ia IIC T4 according to ATEX 2011X
Operating temperature -25 °C to +85 °C
Permissible medium temperature -25 °C to +125 °C
Storage temperature -40 °C to +100 °C
Outputs 4 - 20 mA, 2-wire
Load 600 Ohm / 24 V
1000 Ohm / 32 V

Specifications subject to change.


Data Sheet UniBar E

Screw-in probe with 4 – 20 mA transmitter for level measurement in clear fluids, sludges and gases

Overview Pressure Probes

Overview on submersible and screw-in probes for hydrostatic level measurement

Technical Description Rev. 10 "AquaBar BS, AquaBar II, UniBar E II"

Declaration of Conformity "Pressure Probe"

Declaration of Conformity "Ex" UniBar E II & "Ex" AquaBar II

UniBar E II Ex

System Products
Related Products

Haven't found the appropriate product?

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.


You have questions about your NIVUS products in use? Our service hotline will readily support you.

We are glad to have you here! For any question regarding water or digitisation we are happy to answer you call or your email message.
Im Täle 2
75031 Eppingen