Level Sensors
DSM Level Sensor
Part No. DSMfor level measurement with small distances
Air-ultrasonic sensor for connection to flow transmitters NivuFlow Mobile 750 for non-contact level measurement in part filled flow measurement places.
- Direct sensor connection to flow transmitters such as NivuFlow Mobile 750
- Small construction height
- Minimal dead zone
- Digital echo processing and linearisationNarrow beam angle
- Optimised construction for small pipes
- Easy installation using pipe mounting system or direct fasting using bolts
- View echo profiles on the transmitter
- Integrated temperature compensation
- ATEX approval for Ex-Zone 1
The compact air-ultrasonic sensor Type OCL has been developed for direct connection tor NivuFlow Mobile 750. Thanks to the slim construction it is ideally suitable for use in the crown of small and large pipes, on channel ceilings or other constructions.
The low dead zone allows to measure variable levels in flow applications almost up to full filling. The integrated temperature measurement ensures very high accuracies over the entire very wide measurement range.
The ATEX approval in Ex Zone 1 is a standard feature
| Level Sensor, Type DSM | |
|---|---|
| Zero point drift | absolute zero point stable |
| Measurement principle | ultrasonic - runtime |
| Measurement frequency | 120 / 200 kHz |
| Protection | IP 68 |
| Ex-Approval | II 2 G Ex ib IIB T4 Gb |
| Operating temperature |
|
| Storage temperature | −30°C to +70 °C |
| Operating pressure | max. 1 bar |
| Cable lengths | 7/15 m to connect to electronic box, not extendable |
| Level measurement range | 0 to 200 cm |
| Dead zone (starting at mounting plate) | 4 cm |
| Measurement uncertainty | < +/− 0,5% of measurement area bzw. +/− 5 mm of value (larger value counts) |
| Medium-contacting materials | Polyurethane, Stainless Steel 1.4571, PPO GF30, PA |
Specifications subject to change.
