Level Sensors

NivuBar G II

Part No. HSB0 NBPX XXXX XXG

Hang-in probe with 1” thread and capacitive ceramic measurement cell

Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell

Description
  • Capacitive ceramic measurement cell
  • heavily polluted liquids, sludge as well as pasty and corrosive media
  • Large front-flush diaphragm
  • 1“ thread on sensor bottom
  • 2-wire probe
  • Ex Zone 0
  • High overpressure resistance
  • Integrated overvoltage protection

This hydrostatic level probe has been developed to meet the high demands of industry and environmental protection.
The stainless steel (1.4571) probe body is locked by a capacitive ceramic measuring cell at the bottom.
The probe is equipped with a 1“ thread at the bottom. This thread allows to extend the probe by using a protective tube. The probe then is protected against mechanical damage and the cable within the tube is protected against chemical solvents.

The non-corrosive enclosure featuring protection IP68 permits universal use for reliable determination of levels in containers, basins, shafts and tanks. The large diaphragm has proven as very reliable, particularly in the wastewater sector.

NivuBar G II features ex approval II 1G Ex ia IIC/IIB T4 for Zone 0 as standard and can be installed in any explosive area.

Utilising the widely used 2-wire technology, the installation costs are very low.

Typical applications for G II

  • Pump shafts
  • Grease receiving stations
  • Stormwater treatment plants, storage sewers, retention tanks and discharge constructions
  • WWTPs (screening control, tank levels, sludge tanks, levels in open channels)
  • Industrial applications
  • and many more
Technical Data
Common
Load

600 Ohm / 24 V

1000 Ohm / 32 V

 

Outputs

4 - 20 mA, 2-wire

Cable lengths

5, 10, 20, 30, 50, 100 m

special lengths upon request

 

Cable

Ø 7.4 mm Polyurethane

Long-term stability

± 0.1 % FSO / year

Accuracy according to IEC 60770

0,25 % / 0,35 % FSO

Measurement range

1, 2 and 4 mH2O

special measurement rages upon request

 

Measurement principle

capacitive

Protection

IP 68

Enclosure

Stainless steel 1.4571

diaphragm: ceramics (AL2O3)

 

 

 

Power supply

12 to 36 V DC

Ex: 12 to 28 V DC

 

Specifications subject to change.

Downloads

Data Sheet NivuBar G II

Submersible probe with thread and 4 – 20 mA transmitter for hydrostatic level measurement

Overview Pressure Probes

Overview on submersible and screw-in probes for hydrostatic level measurement

Technical Description Rev.10 "NivuBar Plus II, NivuBar G II, HydroBar G II"

Declaration of Conformity "Pressure Probe"

Declaration of Conformity "Pressure Probe" Ex

EC type examination certificate pressure measuring devices

EC type examination certificate pressure measuring devices incl. supplement

System Products
Accessories
Related Products

Haven't found the appropriate product?

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.

Service

You have questions about your NIVUS products in use? Our service hotline will readily support you.

Hello
We are glad to have you here! For any question regarding water or digitisation we are happy to answer you call or your email message.
Team NIVUS
Im Täle 2
75031 Eppingen