We will keep you informed.
Find out all you need to know about NIVUS - product news, special promotions, practical examples and much more
This hydrostatic level probe has been developed to meet the high demands of industry and environmental protection.
The stainless steel (1.4571) probe body is locked by a capacitive ceramic measuring cell at the bottom and is held by the self-supporting cable on the top.
The probe can be suspended by using a straining clamp.
The non-corrosive enclosure featuring protection IP68 permits universal use for reliable determination of levels in containers, basins, shafts and tanks. The large diaphragm has proven as very reliable, particularly in the wastewater sector.
NivuBar Plus II features ex approval II 1G Ex ia IIC/IIB T4 for Zone 0 as standard and can be installed in any explosive area.
Utilising the widely used 2-wire technology, the installation costs are very low.
|Power supply||12 to 36 V DC Ex: 12 to 28 V DC|
|Enclosure||Stainless steel 1.4571 diaphragm: ceramics (AL2O3)|
|Measurement range||1, 2, 4, 6, and 10 mH2O special measurement ranges upon request|
|Accuracy according to IEC 60770||0,25 % / 0,35 % FSO|
|Long-term stability||± 0.1 % FSO / year|
|Ex-Approval||II 1G Ex ia IIC/IIB T4 IBEx U05 ATEX 1193X|
|Operating temperature||-10 °C to +70 °C|
|Storage temperature||-25 °C to +70 °C|
|Cable||ø9 mm Polyurethane|
|Cable lengths||10, 20, 30, 50, 100 m special lengths upon request|
|Outputs||4 - 20 mA, 2-wire|
|Load||600 Ohm / 24 V 1000 Ohm / 32 V|
Specifications subject to change.
Submersible probe with 4 – 20 mA transmitter for hydrostatic level measurement
Overview on submersible and screw-in probes for hydrostatic level measurement
Instruction manual of submersible and screw-in probes for hydrostatic level measurement