We will keep you informed.
Find out all you need to know about NIVUS - product news, special promotions, practical examples and much more
Clamp-on ultrasonic flow meter sensors are part of a measurement system for continuous flow measurement and storage of the recorded measurement data. They can be used for clean to slightly polluted media.
The sensors of this non contact flow meter are used for flow measurement in full pipes featuring various dimensions.
Thanks to the clamp-on design there is no contact between sensor and the measurement medium. The sensors therefore are particularly suitable for use in the drinking water area. Measurement tasks can be carried out very easy within very short time without any greater effort. This applies for high pressures as well as for aggressive and abrasive media.
Readings are detected based on the ultrasonic transit time principle, which allows versatile use with high accurate measurement results. Thanks to perfectly matched mounting material the system is ideal for retrofitting or as replacement system for existing flow measurements.
General | |
---|---|
Measurement principle | Ultrasonic transit time |
Pipe diameter | 50 - 6000 mm |
Measurement uncertainty | Flow velocity (v average) within path ± 0.1 % of measurement value Offset Velocity < ± 5 mm/s |
Measurement frequency | 1 MHz, other frequencies upon request |
Measurement range | ± 10 m/s |
Protection | IP 68 |
Storage temperature | -30 °C to +80 °C (non-condensing) |
Operating temperature | -30°C ≤ TA ≤ +80°C Ex Version: - 40 °C ≤ TA ≤ +80 °C |
Permissible medium temperature | 0°C to +80°C |
Cable lengths | 7/10/15/20/30/50 m |
Sensor connection | Continuous pre-configured cable |
Zero point drift | Absolutely stable zero point |
Medium-contacting materials | PEEK and stainless steel 1.4301 |
Specifications subject to change.