- Interface and sludge level detection independent of density
- Indicates the current sludge level
- Programming on site via dialog mode orper RS232 via PC software
- No readjustment required
- Sensor-integrated fully automatic cleaningequipment for extreme requirements
NivuScope 2 makes your tanks and basins transparent.
The Measurement Method
The sensor emits directed high frequency impulses into the liquid.
For that purpose, the sensor must be immersedinto the liquid to be measured for a few centimetres.
However it necessarily shall be positioned always above the topmost interface to be measured. Solid particles or sludge contained in the liquid will reflect the sound waves back to the sensor, which subsequently converts the acoustic signals into electric signals.
The intensity of the received signal depending on the ultrasonic transit time is evaluated and will be indicated as a graph on the display.
The NivuScope 2 is particularly suitable for use in:
Wastewater treatment plants
Primary and secondary clarification tanks, thickeners
Fresh water treatment facilities
Sludge sedimentation tanks
|Power supply||• 100 to 240 V AC, 50/60 Hz or
• 22 to 28 V DC
|Power consumption||20 Watt (14 Watt typical)|
|Enclosure||wall mount enclosure, also suitable for
DIN rail mounting
• material: Polycarbonate
• weight: approx. 1200 g
• protection: IP65
|Weight||app. 1200 g|
|Ambient temperature||-20 °C to +50 °C|
|Display||full graphic back-lit LCD, 192 x 128 Pixel|
|Interface||RS232 / RS485 (Modbus, Profibus optional)|
|Outputs||2 x 4 - 20 mA, galvanically isolated, 1000 Ohm max. load
12 bit resolution, deviation 0.1 %
6 relays, function: alarms/limit values/timer
(all contacts as SPDT, max. 5A at max. 240 V AC)
|Software||for echo evaluation and parameter settings as well as data backups
|Sensors (type)||Ultrasonic Sensor VT|
|Measurement range||0.3 to 10 m
not measurable zones min. 30 cm underneath of sensor and approx. 5 cm
above tank bottom
|Material||Valox 357 and stainless steel 1.4401|
|Fastening||fastening: BSP 1" outer thread
includes a wiper for sensor face cleaning
|Cable lengths||10 m, 20 m or 30 m, extendable to max. 200 m|
|Operating temperature||-20 °C to +60 °C|
Specifications subject to change.
Brochure NivuScope 2
NivuScope 2 for separation layer measurement, sludge level measurement and the determination of sludge profiles
Instruction Manual NivuScope 2
Instruction Manual for NivuScope 2 Separation layer Detection Device