- Very high accuracy by means of ultrasonic cross correlation method
- Interference-free connection over long distances through digital signal transmission
- Cables can be extended without any problems using standard cables
- Absolutely stable zero point and drift-free
- Measurement in heavily polluted and abrasive media
- Easy installation without additional constructions and perfectly matched mounting accessories
- Installation under process conditions possible
- Particularly suitable for pipe sections starting at 1000 mm diameter
CS2 flow velocity sensors are suitable for continuous measurement of slight to heavily polluted media.
The pipe-shaped sensors are designed for installation in pipes from the outside using a nozzle. Combined with transmitter types such as NivuFlow 750 and an external level measurement the result is a complete flow measurement system.
Typical applications for CS2 pipe sensor
- Channel networks: billing measurement places, flow measurement in large pipe sections
- Wastewater treatment plants: intake, discharge, activated sludge tank intakes, return sludge, recirculation, surplus sludge, digester discharge and flocculant dosage
- Industrial wastewater networks
- and many more
General | |
---|---|
Construction | Pipe sensor for installation in pipes with sensor screw joint and retaining element |
Measurement principle |
|
Protection | IP 68 |
Ex-Approval |
|
Operating temperature |
|
Storage temperature | −30 °C to +70 °C |
Operating pressure | max. 4 bar (for combi sensors with pressure measuring cell max.1 bar) |
Cable lengths | 10/15/20/30/50/100 m pre-configured, can be extended upon request |
Cable types | LiYC11Y 2 x 1,5 + 1 x 2 x 0,34 PA 1,5/2,5 |
Outside cable diameter | 8.4 mm ±0.25 mm |
Sensor connection | Cable end pre-configured for connection to NivuFlow 750 |
Sensor types | v-sensor with T-compensation |
Medium-contacting materials | Polyurethane, stainless steel 1.4571, PPO GF30, PTFE, PA6 GF30 Optional sensor resistant to chemicals made of PEEK, sleeve made of Hastelloy C-276; cable with FEP coating |
Zero point drift | absolutely stable zero point |
Measurement frequency | 1 MHz |
Measurement range | −100 cm/s to +600 cm/s |
Measurement range | −20 °C to +60 °C |
Measurement uncertainty | for 0.05≤|V|≤0.5 m/s: E_v=0.5/|V| [%] for |V|>0,5 m/s: E_v=1 % |
Specifications subject to change.
Technical Instructions | Correlation Sensors (Rev. 09)
Technical instructions for correlation sensors and external electronic box
Installation Instruction | Correlation and Doppler Sensors (Rev. 07)
Installation instruction for save installation
EC type examination certificate sensor type POA, OCL and CS2
EC type examination certificate sensor type POA incl. supplement
Declaration of Conformity Ultrasonic Active Sensors POA / OCL / CS2
Ultraschall-Aktivsensoren POA / OCL / CS2