Level Meter

NivuCont S

Part No. NCS

Process measurement transmitter with DIN rail enclosure

Multifunctional process measurement transmitter with LED display for Ex- enabled 2/3-wire sensor supply. For hydrostatic level measurement.

  • DIN rail and panel mount enclosure
  • Ex approval Zone 1
  • Easy-to-read LED display
  • 3 relays
  • Pump exchange function

The unit has all the qualities a powerful process measurement transmitter should have today.

There are two free programmable relays available for limit values with hysteresis for min-, max- as well as for pump exchange action. One more error report relay and a scalable galvanically isolated  0/4 - 20 mA output can be used for control purposes and for measurement value evaluation.

Typical applications for NivuCont S

  • Pump shafts
  • Tank  and container measurements
  • Measurement and control of various levels
  • Volume calculation on measurement and discharge weirs, movable weir flaps, Venturi and similar
  • Pressure measurement and control
  • Industrial facilities
  • and many more
Common
Power supply230 V AC, 50 - 60 Hz, ±10% or 18 - 30 V DC
Power consumption max. 3 W
Enclosure - Material: Polycarbonate - Construction: DIN rail or panel mount - Protection: IP 20 (DIN rail) IP 40 (panel mount)
Ex-ApprovalII (1) GD [Ex ia] IIC
Operating temperature-20 °C to +60 °C / with Ex: -10 °C to +40 °C
Storage temperature-30 °C to +70 °C
Max. humidity90 %, non-condensing
Display4-character 7-segment LED display red, height of characters 10 mm
Operation3 keys
Inputs1 x 4 - 20 mA for external level (2-wire probe) Sensor supply: 24 V DC, 4-20 mA
Outputs- 1 x 0/4 – 20 mA, load 400 Ohm, 12 Bit resolution, galv. isolated from analog input, accuracy 0.1 % (after calibration) - 2 relays free programmable, SPDT 1 alarm relay, normally closed maximum load up to 230 V AC / 6 A (cos. 0.9 max. switching capacity: 300 VA switching voltage: min. 100 mV

Specifications subject to change.

Data Sheet NivuCont S

Brochures / Data Sheets English

Transmitter for hydrostatic level measurement

Instruction Manual NivuCont S

Instruction Manuals / Technical Information English

Instruction Manual for measurement device NivuCont S

EU Declaration of Conformity NivuCont S

Certificates German English

Messumformer NivuCont S

NCS0…

EU Declaration of Conformity NivuCont S "EX"

Certificates German English

"Ex" Messumformer NivuCont S

NCS0xxxxxxxE…

  • NivuBar Plus II – zur hydrostatischen Füllstandsmessung

    NivuBar Plus II

    Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and...
    Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell
  • NivuBar H III – zur hydrostatischen Füllstandsmessung

    NivuBar H III

    Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free...
    Submersible probe 4 - 20 mA for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell and free configurable measurement range via HART.
  • NivuBar G II – zur hydrostatischen Füllstandsmessung

    NivuBar G II

    Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in...
    Submersible probe with 1” thread and 4 - 20 mA transmitter for hydrostatic level measurement in water and wastewater. Oil-free capacitive ceramic measurement cell
  • AquaBar BS – 19 mm Brunnensonde für Füllstandsmessungen

    AquaBar BS Submersible Probe

    Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for...
    Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement. Suitable for measurements in deep wells through small diameter of only 19 mm. With piezo-resistive stainless steel measurement cell
  • HydroBar G II – zur hydrostatischen Füllstandsmessung

    HydroBar G II

    Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water,...
    Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. Oil-free capacitive ceramic measurement cell.
  • Aquabar II Tauchsonde mit piezoresistiver Edelstahlmesszelle

    AquaBar II

    Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly...
    Submersible probe with 4 - 20 mA transmitter for hydrostatic level measurement in clean to slightly polluted liquids. With piezo-resistive stainless steel measurement cell
  • UniBar E II – zur hydrostatischen Füllstandsmessung

    UniBar E II

    Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water,...
    Screw-in probe with internal 4 - 20 mA transmitter for hydrostatic level measurement in water, wastewater and gases. With piezo-resistive stainless steel measurement cell.
Deep Well Level Measurement

Deep Well Level Measurement

Detection of deep well in with deep drilling 150 m and dip pipe of just 30 mm...
Detection of deep well in with deep drilling 150 m and dip pipe of just 30 mm inner diameter.
Level Measurement in Grease Trap

Level Measurement in Grease Trap

Reliable measurement of the wastewater-grease mixture level in the pit. ...
Reliable measurement of the wastewater-grease mixture level in the pit.
  • Modulares Montagezubehör für Messumformer zur einfachen Montage

    Transmitter Accessories

    The mounting accessories allow the quick and easy installation of transmitters. The solid...
    The mounting accessories allow the quick and easy installation of transmitters. The solid high-quality accessories made of stainless steel 1.4301 are suitable for indoor and outdoor installation. Transmitters can be simply installed in close vicinity to measurement places. Weatherproof covers protect the transmitters from influences due to weathering in outdoor areas. All accessories are supplied including the according fastening materials.
  • NivuCont Plus Messumformer für hydrostatische Füllstandsmessung

    NivuCont Plus

    Multifunctional process measurement transmitter with graphic display – menus in dialog mode,...
    Multifunctional process measurement transmitter with graphic display – menus in dialog mode, Ex-enabled 2/3-wire sensor supply. For hydrostatic level measurement with integrated pump management.

Haven't found the appropriate product?

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.

Service

You have questions about your NIVUS products in use? Our service hotline will readily support you.

We will keep you informed.

Find out all you need to know about NIVUS - product news, special promotions, practical examples and much more