Flow Meter

NivuFlow 7550New

Part No. N75-5KR1

Hybrid Flow Measurement with Surface Radar and Ultrasonic Profile Scanner

Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar technology.

  • Redundant flow measurement 
  • Contactless Radar surface velocity measurement
  • Ultrasonic sidewards velocity profile sensor
  • Two independent flow measurement technologies increase the accuracy and reliabbility
  • All sensors are above the area of sedimentation,
  • No maintenance
  • Reliable measurement  independently of wave formations, storm conditions as well as in low flow level circumstances

 

Hybrid Flow Measurement

NivuFlow 7550 is a hybrid measurement system which was particularly developed for flow metering in part filled pipes, channels and surface waters. Mainly in difficult applications the flow meter stands out for reliable results thanks to its advantages by using two measurement technologies.

Contactless Radar Flow Measurement

The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate.

Ultrasonic Flow Measurement as Overflow Sensor

The ultrasonic cross correlation sensor can be used as overflow sensor. In such cases the sensor provides reliable and accurate results in overflow situations where radar sensors cannot be used for measuring. Thanks to the flow profile detection and the detection of sedimentation on the bottom the flow rate is determined very accurately. Information on sedimentation is also considered for further measurements using the radar system.

Ultrasonic Flow Measurement as Redundant Measurement

The ultrasonic sensor can be used as permanent redundant measurement too. Installing the sensor on the side walls above the sedimentation helps to avoid soiling. The detection of local flow velocities covers the entire channel width and guarantees the determination of very accurate flow profiles. Pre-programmed hydraulic models increase the accuracy of the measurement system.

Easy Installation and Handling

Due to DIN rail mounting options the compact transmitter saves space and can be installed easily in control cabinets. Moreover the NivuFlow 7550 is available with a special protected field enclosure for use under harsh ambient conditions. The large graphic display permits quick and easy commissioning of the flow meter system.

NivuFlow 550 provides extended diagnostic options and facilitates in-depth analysis of running processes on site. The transmitter software is in line with current requirements. Future-proof protocols and versatile communication and integration options open many ways for operators to integrate the devices into higher systems such as SCADA or process control systems.

 

Typical NivuFlow 7550 Applications

  • Continuous and reliable flow metering in overflow situations
  • Sedimentation detection with ultrasonic level measurement in case of overflow
  • Measurement places featuring high dirt loads and sedimentation
  • Measurement places featuring bed load / debris
  • Measurement places with limited installation options within the channel
  • Reliable flow metering in shooting discharge and low flow levels
  • Berührungslose Durchflussmessung OFR Radar Kompaktgehäuse

    OFR Radar Sensor

    For connection to OCM Pro CF. Suitable for applications featuring high velocities and low levels.
    For connection to OCM Pro CF. Suitable for applications featuring high velocities and low levels.
  • POA Correlation Wedge Sensor

    Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media....
    Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom
  • CS2 Correlation Wedge Sensor

    Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media....
    Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom
  • Mini Correlation Sensor

    Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media....
    Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel bottom
  • iXT Ex-Trennmodul

    Ex Separator Module iXT

    Intelligent Ex separation interface for Ex-safe connection of correlation sensors
    Intelligent Ex separation interface for Ex-safe connection of correlation sensors
  • i-Serie intelligente Sensoren zur Füllstandsmessung

    i-Series Sensors

    Ultrasonic sensors with integrated transmitter for measurement of distance, level, empty space or...
    Ultrasonic sensors with integrated transmitter for measurement of distance, level, empty space or volumes. Suitable for harsh ambient conditions.

Haven't found the appropriate product?

You haven’t found the right product? Then use our application configurator – it will get you to the right product step by step.

Product Consultation

You want to have best information about our products? Our experts will gladly develop together with you the best system solution for your application.

Service

You have questions about your NIVUS products in use? Our service hotline will readily support you.

We will keep you informed.

Find out all you need to know about NIVUS - product news, special promotions, practical examples and much more